What CE (Motor Over-Current) Means
CE indicates an over-current in the washer motor's electrical circuit, caused by a short circuit, a loose connection, a ground fault, or a power surge, per LG's front-load washer Help Library article (LG's WashTower guide documents the same code as a fault in the motor control component).
Common Causes of CE (Motor Over-Current)
- Short circuit in the motor or its wiring
- Loose electrical connection at the motor or control board
- Ground fault in the motor circuit
- Power surge (lightning, grid fluctuation) affecting the motor control component
🔧 One Safe Check You Can Try
Unplug the washer for about 10 seconds and plug it back in to attempt a cycle; if CE reappears, close the water supply taps and unplug the washer again rather than continuing to try - this is an electrical fault, not something to keep power-cycling repeatedly.
⚠ Why You Shouldn't Go Further Than That
- An over-current fault in a motor circuit is an electrical safety issue, not a mechanical one - opening up the motor housing or control board on a full-size appliance carries real shock risk and needs a technician with the washer properly de-energized.
- Repeatedly restarting cycles after a CE fault without having it inspected risks further damage to the motor control board, turning a possibly simple fix into a full board replacement.
- If the same outlet or circuit has had other power issues (flickering lights, tripped breakers), mention that to the technician, since a house-side electrical problem can be the real root cause.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.