What dcL (ezDispense Nozzle Clean) Means
dcL is not an error - LG's front-load washer Help Library article describes it as the ezDispense Nozzle Clean maintenance program, used to clean the dispensing nozzles and hose when changing detergent/softener type or after the system hasn't been used in a while.
Common Causes of dcL (ezDispense Nozzle Clean)
- ezDispense system due for its routine nozzle-cleaning maintenance
- Detergent or softener type recently changed, triggering the recommended clean
🔧 One Safe Check You Can Try
Empty and clean the ezDispense compartment(s) fully, add no detergent or softener, fill with water up to the max line, and run the Nozzle Clean function per your owner's manual - LG notes the cleaning function takes about 16 minutes.
⚠ Why You Shouldn't Go Further Than That
- There's nothing to repair - dcL is a maintenance program you run intentionally, not a fault code that appears on its own.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.