What dE, dE1, E01 (Door Not Closed) Means
dE, dE1, or E01 means the washer door didn't close properly, most often because laundry has caught between the door and the rubber gasket, per LG's front-load washer Help Library article (LG's top-load washer article documents the same underlying door-open condition under the single code dE).
Common Causes of dE, dE1, E01 (Door Not Closed)
- Laundry caught between the door and the rubber door gasket
- Door not pushed fully closed
- Door latch mechanism worn or misaligned
🔧 One Safe Check You Can Try
Open the door, check the full circumference of the rubber gasket for any trapped clothing, and close it firmly again; if it still won't clear, power the washer off, unplug it, wait about 5 seconds, and reconnect before trying once more.
⚠ Why You Shouldn't Go Further Than That
- If a proper reset and a clean, fully-closed door still trigger dE/dE1/E01 repeatedly, the door latch or its sensor likely needs replacement, which is inside the door frame assembly and not a simple adjustment.
- Forcing the door shut against something caught in the gasket can tear the seal, turning a laundry mishap into a real leak risk at the door - always clear the obstruction first rather than pushing harder.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.